Protective measures of scrap steel shredder
Let’s talk about working in various weather conditions today1. Avoid storage and operation in a humid environment.The shredder equipment is made of iron and steel. Although anti-rust treatment has been done in the production process of the equipment, it may still cause the shredder equipment to rust if it is used in a humid environment or working for a long time. If the shredded waste materials are stored in the open air, and the materials are directly fed to the shredder without drying treatment, the inside of the shredder cavity will also rust. Such a long working scene will reduce the output of scrap shredders and increase the failure rate of equipment. Therefore, the scrap shredder should avoid storage and operation in a humid environment2. Avoid exposureOpen-air operations in summer will also cause certain damage to the equipment. The sunshine in summer is strong. Both the waste materials and the shredder equipment will form high temperatures under the sun. The problem may reach 50 to 60 degrees. If the production is resumed, the blade shaft will also generate temperature during the shredding process. The problem of the knife shaft will soar to one or two Baidu in such a situation, such a high temperature will exceed the working temperature of the bearing lubricating and oil change, you can not get good lubrication, it will cause damage to the bearing wear, As for the equipment cannot be produced normally.