Crocodile shear safety operation procedures
Crocodile shear safety operation procedures1. Equipment should be operated by people, and others should not be used without training.2. Before driving, check that the parts are normal and the fasteners are secure.3. It is forbidden to cut unannealed steel, cast iron, soft metal parts, thin workpieces, workpieces less than 100 mm in length, and workpieces that exceed the length of the scissors.4. During operation, the human body is not allowed to approach the transmission part and the knife edge of the equipment, and should pay attention to the safety of the surrounding personnel to prevent the material from lifting and injuring people. When cutting, try to cut the material close to the inside of the knife. When cutting short materials, do not use hand-held workpieces for feeding. Clamps should be used for feeding.5. When the equipment is running, the operator shall not leave the post without permission. When the work is completed or temporarily removed from the post, the power should be cut off. At the same time, the machine should not be repaired or touched by hand when the machine is running. It is strictly forbidden to press the material in the bin by hand or foot.6: Lubricating parts of the machine should be filled with oil at least once per shift as required.GEP Machinery is a professional manufacturer specializing in the development, research and production of shredder equipment, with professional production technology, advanced production technology, sophisticated manufacturing equipment and reasonable after-sales service. We produce tire shredder, car shredder, waste shredder machine, mini aluminum can shredder.